|
Instrumentation and Control Cables
Bhansali can supply a wide range of control cables i.e.
copper, aluminium conductor. The control cables generally have the
ability to transmit electricity and signals so that you can avoid
transformation of signals from low voltage in order to control
motors and relays. Electromagnetic disturbances generally have no
influence due to the strength of the signals, or we can say that
Control Cables play a vital and keen role in our industrial
systems. The high flexibility in control cables is
achieved by the use of fine wire copper strands, short lay lengths
and by powdering of the cores to maintain core separation.
We are renowned for our control cables which generally have
the following characteristics
- Stranded, Solid conductor
- Multi-core cables available up to 61 cores
- Primary insulation Type A, Type C, HR-85°C
- Voltage grade 1100 Volts
- Core identification as per ISI colour code along with
numbering
- Sheath materials PVC ST-1, ST-2, HR, FRLS, Unarmoured, Armoured round wire, flat strip
- Jacket
materials PVC ST-1, ST-2, HR, FRLS
Description
Solid
stranded annealed plain high conductivity electrolytic grade
copper, aluminium conductor confirming to IS: 8130 1984. Individual
core insulated with extruded PVC compound type 'A' confirming to
IS:5831 1984. All such cores are laid up in a common covering of
PVC called inner sheath armoured with galvanised mild steel
wire, strip confirming to IS: 3975, 1979 and finally jacketed with
extruded PVC type ST-1 confirming to IS: 5831, 1984.
Technical Data
For
Copper, Control Cables, Type YY, YWY, YFY Conductor Solid, Stranded
Colour Code : As per
ISI
Working Voltage : 650/1100
Volts
Test Voltage : 3000 Volts
Insulation Resistance : 36.7 M
Ohm/Km
Note: The cables
specified above conform to BIS standards, We also design, develop
and manufacture cables as per various other international standards
like VDE, BS, IEC, ASTM, JIS etc., and also as per specific customer
requirements. | Conductor | No of Pairs | Unarmoured Nominal Overall diameter (mm) | Armoured Nominal Overall diameter (mm) | | 1/0.8 mm (0.5mm2 | 1 2 (Quad) 5 10 20 30
| 6.3 7.1 11.6 15.0 19.4 23.0
| 10.7 11.5 16.2 20.7 26.0 29.8 | | 16/0.2 mm (0.5mm2 | 1 2 (Quad) 5 10 20 30
| 7.0 7.9 13.1 17.2 22.3 26.9
| 11.4 12.3 17.9 22.9 29.1 33.9 | 24/0.2 mm (0.75 mm2)
| 1 2(Quad) 5 10 20 30 | 7.3 8.3 14.3 18.7 24.5 29.5 | 11.7 12.9 19.8 25.3 31.3 37.5 | 1/1013 mm (1.0mm2)
| 1 2(Quad) 5 10 20 30 | 7.4 8.4 14.2 18.4 24.4 29.0 | 11.8 13.0 19.7 24.3 31.2 36.2 | 7/0.53 mm (1.5mm2)
| 1 2(Quad) 5 10 20 30 | 8.3 9.7 16.4 21.6 28.5 34.3 | 12.9 14.3 22.1 28.4 35.7 42.5 |
|
